The ADLINK PCI-7248 is a 48-channel programmable digital input/output (DIO) card designed for industrial computers, automated test equipment, machine control, and data acquisition applications. Featuring a conventional 32-bit, 5V PCI bus interface, the PCI-7248 provides reliable TTL/DTL digital signal interfacing for industrial control and monitoring systems.
The PCI-7248 emulates two industry-standard Intel 8255 Programmable Peripheral Interface (PPI) devices operating in Mode 0. Each emulated PPI provides three 8-bit digital ports, allowing flexible configuration of digital input and output signals. The board supports 48 programmable digital I/O channels through two 50-pin ribbon cable connectors.
Designed for integration with OPTO-22 compatible I/O modules, the PCI-7248 can interface with external relay modules, isolated input modules, industrial sensors, and control equipment through suitable terminal boards and signal-conditioning accessories.
The card also incorporates an onboard 8254 timer/counter, programmable interrupt sources, output status readback, and protected auxiliary power connections. These features make the ADLINK PCI-7248 suitable for maintaining legacy industrial computer systems that require PCI-based digital I/O functionality.
| Manufacturer | ADLINK Technology Inc. |
| Model | PCI-7248 |
| Product Type | Programmable Digital Input/Output Card |
| Bus Interface | 32-bit, 5V PCI |
| Digital I/O Channels | 48 Programmable Channels |
| Logic Compatibility | 5V TTL/DTL |
| PPI Architecture | 2 x 8255-Compatible PPI |
| PPI Operating Mode | Mode 0 |
| Digital Ports | 6 x 8-bit Ports |
| Input Logic High | 2.0V to 5.25V |
| Input Logic Low | 0V to 0.8V |
| Input High Current | 20 microamps |
| Input Low Current | -0.2mA |
| Output Logic High | 2.4V Minimum |
| Output Logic Low | 0.5V Maximum |
| Output Source Current | 2.6mA (Ports A/B); 15mA (Port C) |
| Output Sink Current | 24mA |
| Data Transfer Method | Programmed I/O |
| Maximum Transfer Rate | 500KB/s |
| I/O Connectors | 2 x 50-pin Male Ribbon Connectors |
| External I/O Compatibility | OPTO-22 Compatible Modules |
| Timer/Counter | Onboard 8254 |
| Timed Interrupt | 32-bit Timer |
| Event Counter | 16-bit |
| Interrupt Support | Programmable Interrupt Sources |
| Output Readback | Supported |
| Auxiliary Power Outputs | +5V and +12V |
| Power Protection | Resettable Fuses |
| Typical Power Consumption | 500mA at +5VDC |
| Maximum Power Consumption | 540mA at +5VDC |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -20°C to +80°C |
| Relative Humidity | 5% to 95%, Non-Condensing |
| PCB Dimensions | 148 x 102 mm |
| Form Factor | Half-Size PCI Card |
| Configuration | PCI Plug-and-Play |
| Software Support | ADLINK DAQ Drivers and SDKs; Verify OS Compatibility |
| Product Category | Industrial Digital I/O and Data Acquisition |
The ADLINK PCI-7248 is intended for industrial computer systems requiring 48 channels of programmable 5V TTL/DTL digital I/O through a conventional PCI bus.
Before selecting a replacement, verify the computer's PCI slot voltage and mechanical compatibility, operating system, device drivers, application software, digital I/O pin assignments, external cables, terminal boards, and signal voltage requirements.
Important: The PCI-7248 uses a conventional 32-bit PCI interface and is not directly interchangeable with the PCIe-7248 or cPCI-7248 without verifying the host interface and software compatibility. The digital I/O channels are TTL-level signals and should not be connected directly to industrial field voltages without suitable isolation or signal conditioning.
Compatible OPTO-22 terminal boards and ribbon cables may be required depending on the installation. Accessories should be confirmed separately.
Looking for the ADLINK PCI-7248 48-Channel Digital I/O Card? SoftTouch Technologies specializes in sourcing, testing, and supplying legacy industrial I/O cards, data acquisition boards, embedded CPU boards, industrial motherboards, and discontinued computing components.
Contact our team for product availability, pricing, technical specifications, configuration verification, and replacement assistance.
EmbeddedCPUBoards.com provides quote-based sourcing, repair, replacement, and lifecycle support for obsolete, legacy, and hard-to-find embedded CPU boards, system host boards, industrial motherboards, backplanes, and related assemblies.
Supporting legacy and active platforms for industrial, military, medical, automation, energy, and test systems.